Store LocatorHome Page Store Loca 

Level Four Pricing

Most shops are staffed and equipped to handle level 1 & 2 work. Action Machine has the resources to handle up through level 4 work. This requires the latest in technology and an ASE Certified Master Machinist knowledge level. This pricing matrix is based on the highest level obtainable by precision blueprinting work performed by man, equipment, complexity of work, or combination thereof.

2100 Rottler F-65 Set Up
2800 Main Cap Work

2200
Cylinder Boring
2900
Repeatable Machining

2300
Cylinder Honing
3000
Con Rod Center to Center

2500
Crankshafts
3100
Block/Deck Work

2600
Line Boring
3200
Rottler F-65 Machine Time

2700
Lifter Bore Aligning		    
       
   

2100

ROTTLER F-65 SET UP

2100 INSTALL INLINE BLOCK $  71.50
2108 INSTALL V-TYPE BLOCK $  93.50

 

 

    
2200
 CYLINDER BORING - min hole 2” max 5” dia 9” deep
  Done on Rottler F-65Machine   (view)  
2200 4 CYL $137.50
2606 6 CYL $159.50
2608 8 CYL $203.50
  All Plus Honing  

 

 

    
2300 CYLINDER HONING - Hole min 2.9” max 5.062”
  Diamond honing to Performance RA (view)  
2300 4 CYL $  82.50
2306 6 CYL $126.50
2308 8 CYL $137.50
2309 TORQUE PLATE W/BOLTS  $  20.50/cyl
2310 TORQUE PLATE W/STUDS $  27.00/cyl

 

 

    
2500 CRANKSHAFTS
  Special Radius, Sizing, Finishing or Stroking  
2500 4 CYL $159.50
2506 6 CYL $192.50
2508 8 CYL $192.50
2509 DOCUMENT SIZE & STROKE $  98.50
  All crank work includes Clean, Mag and Polish  

 

 

    
2600 LINE BORING - Hole min 1.875”  max 4.00”
     
2601 1 HOLE $187.00
2602 2 HOLE $209.00
2603 3 HOLE $231.00
2604 4 HOLE $253.00
2605 5 HOLE $275.00
2606 6 HOLE $297.00
2607 7 HOLE $319.00
2610 FINISH HONE REQUIRED $  82.50
  STEPPED CAPS ADD $20.00 PER CAP  

 

 

  
2700 LIFTER BORE ALIGNING
  Done on Rottler F-65Machine   (view)  
2700 COMPLETE ENGINE V8 
$495.00 +   BUSHINGS
2701 HONE BORES PER HR $  98.50
2708 .875" BORE NO BUSHING $269.50
2710 CUMMINS 5.9L CAM BRG BORE $638.00
2715 Sm Bk Chev BORE CAM LINE FOR 50MM ROLLER BEARINGS AND INSTALL BEARINGS $764.50

 

 

  
2800 MAIN CAP WORK (view)
   
2800 CAP MATCHING   see note #1    $462.00
2801 3 NON SPLAYED CAP  see note #2 $412.50
2802 3 SPLAYED CAP  see note #2 $462.00
2803 FRONT CAP   see note #3 $  38.50
2804 REGISTER MILL  
$137.50
2805 MAIN CAP STRAPPING   see note #3  $  38.50/ea
2806 REAR CAP STRAPPING   see note #3   $  60.50/ea
2807 PREP FOR 4 BOLT CAPS $110.00
 
Note #1 Plus Line Bore or Hone
Note #2 Plus Register work or Milling charged at hourly rate
Note #3 With Line Bore - Without Line Bore Charged at hourly rate		  

 

 

    
2900 REPEATABLE MACHINING
  Done on Rottler F-65Machine   (view)  
2901 DIESEL PISTON CUP MODIFY  $ 34.50/ea
2903 MILL FLAT TOP PISTON  $ 13.75/ea
2906 VALVE CHAMBERS  $  27.50/ea

 

 

    
3000 CON ROD CENTER TO CENTER
     
3000 1 ROD $  41.25
3001 SETS $  32.50/ea

 

 

    
3100 BLOCK/DECK WORK
     
3101 INLINE BLOCKS   $109.50
3102 BLOCK ENDS $109.50/ea
3103 SQUARE BLOCK TO HEIGHT $219.00
3104 O-RING HEAD PER CYL   $ 21.50/ea*
3105 O-RING FOR FELPRO LOCKWIRE see note #1 $  98.50/head
3106 O/FIRE RING BLOCK  (min $108.00)   $  27.00/cyl
3107 INSTALL O-RING WIRE (2hr min) $  89.50/hr
3108 MILL REGISTERS STEPPED HOLE $137.50
  Note #1 Stainless Steel/Copper wire .041”  dia.  $.75 per foot*Plus Resurfacing  

 

 

    
3200 ROTTLER F-65 MACHINE TIME
     
3200 PER HOUR $247.50
3300 BLOCK PACKAGES