17012 AURORA AVE NORTH  SHORELINE, WASH 98133

PHONE 206-546-2082 FAX 206-546-9400

LEVEL 4 PRICE SCHEDULE

MOST MACHINE SHOPS ARE STAFFED & EQUIPPED TO HANDLE LEVEL 1 & 2 WORK. ACTION MACHINE HAS THE RESOURCES TO HANDLE UP THRU LEVEL 4 WORK, WHICH REQUIRES THE LATEST IN TECHNOLOGY AND AN ASE CERTIFIED MASTER MACHINIST KNOWLEDGE SKILL LEVEL.

THIS PRICING MATRIX IS BASED ON THE HIGHEST LEVEL OBTAINABLE BY PRECISION BLUEPRINTING WORK DONE BY MAN, EQUIPMENT, COMPLEXITY OF WORK, OR COMBINATION THEREOF.

 

2100	ROTTLER F-65 SET UP
2100	INSTALL INLINE BLOCK	71.50
2108	INSTALL V-STYLE BLOCK	93.50

 

2200	CYLINDER BORING min hole size 2" max 5" dia 9" deep
	Done on Rottler F-65 Machine
2200	4 CYL BLOCK	137.50
2206	6 CYL BLOCK	159.50
2208	8 CYL BLOCK	203.50
	ALL PLUS HONING OF CYLINDERS

             BACK TO MAIN PRICING

2300	CYLINDER HONING Hole min size 2.9" max 5.062" Diamond honing to Performance RA	back to top
2300	4 CYL	82.50
2306	6 CYL	126.50
2308	8 CYL	137.50
2309	TORQUE PLATE W/ BOLTS	20.50 per cyl
2310	TORQUE PLATE W/ STUDS	27.00 per cyl

 

2500	CRANKSHAFTS
	Special Radius, Finishing, or Stroking
2500	4 CYL	159.50
2506	6 CYL	192.50
2508	8 CYL	192.50
2509	DOCUMENT SIZE & STROKE	98.50
	All crank work includes Clean, Mag, and Polish of shaft

            BACK TO MAIN PRICING

2600	LINE BORING	back to top
	min hole size 1.875" max size 4.00"
2601	1 HOLE	187.00
2602	2 HOLES	209.00
2603	3 HOLES	231.00
2604	4 HOLES	253.00
2605	5 HOLES	275.00
2606	6 HOLES	297.00
2607	7 HOLES	319.00
2610	FINISH HONE REQUIRED	82.50

STEPPED CAPS ADD $20.00 PER CAP

2700	LIFTER BORE ALIGNING
	Done on Rottler F-65
2700	COMPLETE ENGINE V8	495.00 + BUSHINGS
2701	HONE BORES PER HOUR	98.50
2708	REBORE V8 LIFTER BORE TO .875" NO BUSHINGS	269.50
2710	CUMMINS 5.9L CAM BRG BORE	638.00
2715	Sm Bk Chev  BORE CAM LINE FOR 50mm ROLLER TYPE BEARINGS AND INSTALL	764.50

BACK TO MAIN PRICING

2800	MAIN CAP WORK click here for image	back to top
2800	CAP MATCHING see note #1	462.00
2801	3 NON SPLAYED CAP see note #2	412.50
2802	3 SPLAYED CAP see note #2	462.00
2803	FRONT CAP see note #3	38.50
2804	REGISTER WORK	137.50
2805	MAIN CAP STRAPPING see note #3	38.50 each
2806	REAR CAP STRAPPING see note #3	60.50 each
2807	PREP FOR 4 BOLT CAPS	110.00
	Note #1 Plus Line Bore or Hone
	Note #2 Plus Register Work or Milling charged at hourly rate
	Note #3 With Line Bore- Without Line Bore Charged at hourly rate

 

2900	REPEATABLE MACHINING
	Done on Rottler F-65
2901	DIESEL PISTON CUP MODIFY	34.50 each
2903	MILL FLAT TOP PISTONS	13.75 each
2906	REPEATABLE F65 MACHINING	27.50 each

            BACK TO MAIN PRICING

3000	CON ROD CENTER TO CENTER
3000	1 ROD	41.25
3001	SETS	32.50 each

3100	BLOCK/DECK WORK	back to top
3101	INLINE BLOCKS	109.50
3102	BLOCK ENDS	109.50 each
3103	SQUARE BLOCK TO HEIGHT	219.00
3104	O-RING HEAD PER CYLINDER	21.50 each*
3105	O-RING HEAD FOR FELPRO LOCK-WIRE see note #1	98.50 per head
3106	O/FIRE RING BLOCK (min $108.00)	27.00 per cyl
3107	INSTALL O-RING WIRE (2hr min)	89.50 per hr
3108	MILL REGISTERS STEPPED HOLE	137.50
	note #1 Stainless Steel/Copper wire .041" dia $0.75 per foot
	* Plus Resurfacing

            BACK TO MAIN PRICING

3200	MACHINE TIME
3200	BORING	247.50 per hr.
3201	HONING	203.50 per hr.
3202	LATHE WORK	137.50 per hr.
3203	SURFACING	247.50 per hr.
3300	BLOCK PACKAGES	Call for Pricing

If you have any questions concerning any machining work please call the shop at 206-546-2082 or e-mail to shop@actionautoparts.net.  If you have questions about this website, e-mail to  webmaster@actionautoparts.net. Disclaimer and terms of use for all information derived or obtained from Action Machine.  

This page last modified 10 May 2007  Copyright  2006,2007  Action Autoparts -- All rights reserved